Built to the dimensions the service manual prints: 319.7 mm rotor, 32 mm nominal thickness, six lugs. Click any part to read its catalogue number, torque value and manual page. Every view can be reached with the buttons below — no dragging or scrolling needed. The toolbar downloads it as OBJ or GLB.
Say any button name to press it. Arrow keys turn and tilt, plus and minus zoom, zero refits.
Values as printed, with the page they come from. The anchor plate bolts are single-use.
| Part | N·m | Imperial | Note | Page |
|---|---|---|---|---|
| Wheel lug nuts × 6 | 130 | 96 lb-ft | Star / cross pattern | 1164 |
| Caliper anchor plate bolts × 2 | 180 | 133 lb-ft | New bolts each time | 1179 |
| Caliper guide pin bolts × 2 | 54 | 40 lb-ft | Caliper onto anchor plate | 1180 |
| Anchor plate to knuckle × 2 | 80 | 59 lb-ft | Also the hub / bearing bolts | 1182 |
| Measurement | Front | Rear | Source |
|---|---|---|---|
| Diameter | 319.7 mm (12.586 in) | 324 mm (12.755 in) | p. 1207 |
| Nominal thickness | 32 mm (1.259 in) | 12 mm (0.472 in) | p. 1207 |
| Discard thickness | 30.7 mm (1.208 in) | 10.5 mm (0.413 in) | p. 1207 |
This is a schematic model, not scanned CAD. Diameters, thicknesses and fastener counts follow the manual; casting shapes, vane geometry and the caliper body are representative. Use it to understand stack-up and assembly order, not to machine a part.